Gypsum tiles have to be laid correctly, as not only the aesthetic appearance of cosmetic facing, but also the service life of this

material will be based on the technology of job. The product is universal, and it may be connected to concrete, plaster, brick or

gypsum board sheets, and provided that the top layer of the base is even and has no flaws.

If the flaws of this foundation are important, it should be completely treated with primer, then a cement mortar is made, which

satisfies all of the cracks. Then the surface ought to be primed and dried. In this case, its composition should decide on a

particular, containing elements which stop the appearance of fungus and mold.

In today’s interior of these rooms most frequently used gypsum tiles, imitating natural stone or brick. To execute decorative

finishing your self, it is essential firstly to choose a scheme of tile placement and prepare a solution. It is very important to

pay attention to the opposite side of the substance. When its surface includes an embossed surface, then the adhesive should be

put having an even trowel, and if it is even, then with a notched one.

The technologies of this job is as follows:

* A thin coating of glue mortar is placed on the pre-prepared wall. It is spread over the base so that it is likely to place 4-5

tiles. Decorative cladding can be placed either on plasterboard, also on putty.

* Glue the back side of these tiles with glue.

* Plaster components are pushed against the walls and their location is adjusted. To align the seams, it is suggested to use


* Finishing is performed in rows, all which ought to be changed by half of a tile. Facing is completed to the corners of the

space, and then immediately get rid of any residual mortar at the joints.

Drying the walls requires no longer than a day and takes a constant humidity and temperature inside the room. The last point in

the laying of gypsum tiles is that their decoration. To try it, the joints between the components are filled with a special

solution, the shade of which matches the brick.

Cosmetic fake of brickwork on the walls will be completed in the following manners:

* Cutting on the plastered surface of the seams of masonry using a bolt cutter along with your hands;

* laying of tiles under the brick:

* mimicking the structure and colour of the side of one brick;

* Imitating a fragment of brickwork of many bricks.

The best method to decorate»beneath the brick» is the one that enables you to create a usable coating together with the utmost

look of its resemblance to organic masonry. All 3 ways to execute this sort of finishing functions fulfill the requirements,

however, the cutting of joints with a bolt is labor-intensive and also the creation of considerable quantities of dust, so let us

consider more prevalent ways.

The old finish is removed from the walls, and the outside, if needed, is leveled to eliminate the need to glue plaster on a thick

layer of glue.

Combining these cladding with other kinds of interior finishes may be both orderly and performed without any apparent

consequences, chaotically, together with imitation of signs of aging.

With the support of cosmetic gypsum tiles it is possible to imitate a large number of textures.

A lot of textures can be imitated with the support of decorative gypsum tiles.

The wall on which it is to be set up should have the following attributes:

* Hardness and intensity of the outside;

* The lack of uneven locations and sharp sections;

* no deformations.

Decorative tiles at the interior of the kitchen

Walls are made from a variety of materials, let us break down the principles of installment.

When working with concrete, there will not be any big problems. It’s simply necessary to take into consideration the porosity of

this material. Concrete, which has practically no pronounced pores, should be treated with a fantastic primer.

Mounting gypsum tiles concrete

Before starting work on the installation of gypsum tiles to the walls, then it’s well worth checking the strength of their

surface. After the plaster doesn’t fall off the walls and at precisely the exact same time holds well, it’s possible to simply

paint it with primer.

Mount the tiles onto the painted concrete should not. The surface should be scratched, making sure to misfire, then it ought to be

grouted and covered with a layer of plaster.