The entire set for the construction of a 4-meter greenhouse 3 sheets of mobile polycarbonate in the shape of rolls of 2.1 m in length and a diameter of 60-90 cm. The depth of the substance is 4 mm.

If you would like, you are able to raise the duration of the structure to 6 metres or more. To try it, it is sufficient to join a two-meter expansion. When picking a drawing, focus on the distance between the arches. This figure needs to be 65 cm, which is the most appropriate duration for the specified thickness of the material. The width of the doorways in line with the producer’s drawing is 90 cm.

Before building a polycarbonate greenhouse, it is necessary to choose a location because of its place. If this is done correctly, you can provide yourself with a crop of fresh veggies for the whole calendar year.

The place for your future greenhouse is marked instantly in the preparation of their garden plot. So as to melt the snow in the positioning of the greenhouse as soon as possible, the ideal point on the site is going to be a slight elevation. Furthermore, in such a location won’t have to be concerned about significant humidity as soil and air in the building.

Build a polycarbonate greenhouse on an elevated site – means to look after the optimal temperatures indoors.

When it is not feasible to place a greenhouse in an elevated position, you will have to pour a layer of fine crushed stone around 20 cm and the same layer of fertile land to create seedbeds.

Before assembling a greenhouse in your backyard plot, you should also think about where and how this construction will be set up. First, you have to select a location for it. The greenhouse ought to be located in a metropolitan region at least a few meters away from houses, barns and other structures.

How to Put in a greenhouse in Line with the Surfaces of the world

Be sure to measure the soil surface – it’s best to even remove the surface. This can also eliminate weed seeds. And for ease of work, eliminate the soil in a place that’s going to a meter wider on both sides of the rectangle you desire.

Additionally, it is worth thinking about using a foundation. As manufacturers say, now most greenhouses do not need that, particularly if they (greenhouses) are employed just in the summer and spring time. But, experienced gardeners still recommend earning an elementary basis from a bar. It is quite simple – it is enough to link with each other utilizing metal corners and screws four pieces of timber with a cross-section of at least 10 * 10 cm. The size of such a base should be equal to the foundation of their future greenhouse.

Simple bar base

You can even create a strip foundation of concrete. He’s more dependable than a pub base, but requires more financial and labour expenses. Incidentally, the greenhouse, which will be used in winter, without it and do not do without it at all.

Stages of the formation of a strip base: a schematic representation

Many producers counsel to install greenhouse structures without creating a base. For this function, they equip the frame with special T-shaped legs, so that the construction was securely fixed. But, as practice shows, it is still required to build a foundation: therefore and the basis will be more firmly fixed and also the components of the foundation in touch with the soil, will be saved much longer in its original condition.

The main thing is to see to the material with specific agents to protect the wood from moisture. The substance is generally installed on concrete cubes that are dug into the soil. To get a six-meter arrangement, they need 10 pieces: four to each side and one at the center of the ends.

Before you do the greenhouse , you have to pick the ideal place for it. It has to be an even site, so the framework was located equally, without distortions. It needs to be sunny and never obscured by buildings or trees.